Description
A lost, damaged, or failed charger is one of the most common reasons a Razor electric scooter or ride-on sits unused — and it is also one of the easiest problems to solve incorrectly. The most critical mistake riders make is using a charger with the wrong output voltage. Connecting a 12V charger to a 24V battery system will fail to charge it; connecting a higher-voltage charger risks overcharging, overheating, and permanent battery damage. The voltage must be correct, every time.
This is the genuine Razor 24V / 0.6A (600mA) replacement charger with a European two-pin plug — the factory-specification charger supplied with a wide range of Razor 24V electric scooters and ride-ons in the European market. It delivers a precisely regulated 24 volts at 600 milliamps (0.6A) — the exact output required to charge the 24V sealed lead acid battery systems fitted to all compatible models safely and efficiently, without the risk of over-voltage or excessive current that can permanently degrade a battery.
The charger features a 3-pin inline connector — the standard charging connector used across Razor's 24V product range. This is distinct from the single-pin connector used on Razor's 12V products, so always confirm your model's voltage and connector type before ordering
Precisely Regulated 24V / 0.6A Output — The genuine charger delivers the exact voltage and current specified for the 24V battery systems on all compatible models. Generic chargers frequently deviate from their stated output, delivering slightly higher voltages that cause the battery to overheat during charging and permanently reduce its capacity over time.
3-Pin Inline Connector — Guaranteed Correct Fit — The 3-pin inline connector is dimensioned to the exact tolerances of the charging port on all compatible 24V Razor models, ensuring a secure, positive connection every time. A loose or ill-fitting connector causes intermittent charging and can arc, damaging the charging port permanently.
EU Two-Pin Plug for European Outlets — Designed specifically for use with standard European two-pin (Type C/E/F) wall sockets, operating on the 220–240V / 50Hz supply standard across Europe. No adapters required.
Protects and Extends Battery Life — Charging at the correct 24V voltage and 0.6A current is the single most important factor in maximising the working life of a sealed lead acid battery. The genuine charger's regulated output ensures the battery reaches full charge without the overcharge cycles that degrade capacity and shorten service life.
Universal AC Input — The charger accepts a 100–240V AC input at 50/60Hz, making it compatible with the full range of European mains supplies and suitable for use across all EU countries
Razor Crazy Cart
All versions
Razor Crazy Cart DLX
All versions
Razor E100
All versions
Razor E100 Glow
All versions
Razor Power Core E100
All versions
Razor E125
All versions
Razor E150
All versions
Razor E175
All versions
Razor E200
All versions
Razor eSpark
All versions
Razor Crazy Cart Shift
All versions
Razor Trikke E2
All versions
Voltage check — essential before ordering: This is a 24V charger. It is designed exclusively for Razor products with a 24V battery system. It is not compatible with 12V products (such as the Power Core E90, PowerRider 360, or Crazy Cart Shift 2.0) or 36V products (such as the Crazy Cart XL). Using the wrong voltage charger will either fail to charge the battery or cause permanent battery damage.Connector type: This charger uses a 3-pin inline connector. It is not compatible with Razor models that use a single-pin or two-pin charging port. If you are unsure of your model's connector type, check the charging port on your ride-on before ordering
My Wishlist
Wishlist is empty.
Compare
Shopping cart






