The rear caster wheels are the defining component of the Crazy Cart Shift 2.0 and RipRider 360's drift system. Unlike conventional ride-ons where the rear wheels simply roll forward, the caster wheels on these models are free to rotate in any direction — it is this freedom of movement that enables the 360-degree spinning, sideways sliding, and unpredictable drifting that makes both products so distinctive. When the wheels wear down, become flat-spotted, or sustain damage, the drift performance degrades noticeably: the ride becomes rough and vibration-heavy, the spinning becomes less fluid, and the characteristic smooth glide of a well-maintained cart is lost.
This is the genuine Razor factory replacement set of two 76mm x 24mm rear caster wheels, built to the exact specification of the original wheels fitted to the Crazy Cart Shift 2.0 and RipRider 360. The 76mm diameter x 24mm width is the factory-standard size for these models — narrower than the 30mm-wide wheels used on later Crazy Cart variants, and specifically dimensioned to fit the caster forks on the Shift 2.0 and RipRider 360 chassis without modification.
Each wheel comes pre-fitted with precision bearings and a spacer, ready to install directly onto the existing caster forks. Supplied as a matched pair, replacing both rear wheels at the same time ensures even wear and balanced drift performance from the first ride.
(Sold as a set of two wheels. Caster forks and hardware are sold separately.)
Restore Full Drift Performance — Worn or flat-spotted caster wheels are the most common cause of degraded drift performance on the Shift 2.0 and RipRider 360. Fresh genuine wheels restore the smooth, fluid 360-degree spinning and sideways gliding that define the riding experience on both products.
Exact 76mm x 24mm Factory Specification — Manufactured to the precise dimensions of the original wheels, ensuring a perfect fit in the existing caster forks without shimming, modification, or the wobble that results from an imprecise fit.
Pre-Installed Precision Bearings & Spacer — Each wheel arrives fully assembled with bearings and spacer already fitted, making installation a straightforward swap with no additional components to source.
Replace as a Matched Pair — Supplied as a set of two, these wheels are designed to be fitted together. Replacing both rear wheels simultaneously ensures even wear across the drift surface and maintains the balanced, symmetrical handling that both products are designed to deliver.
Durable Polyurethane Construction — The solid PU compound is chosen for its wear resistance under the intense lateral scrubbing generated during drifting and spinning, outlasting softer materials that flat-spot quickly under repeated use
Razor Crazy Cart Shift 2.0
All versions
Razor RipRider 360
All versions
Razor FlashRider 360
All versions
Wheel size check — essential before ordering: These wheels are 76mm x 24mm. This is the narrower 24mm-wide variant used on the Shift 2.0, RipRider 360, and FlashRider 360. It is not the same as the 76mm x 30mm wheels used on the standard Crazy Cart (V7+), Crazy Cart DLX, and Crazy Cart Shift (V1). Always confirm your model before ordering to ensure the correct width.Caster forks not included: This listing covers the wheels only. Caster forks and mounting hardware are sold separately
