Genuine 12V / 7Ah Replacement Battery for Razor Power Core S80, Power Core S85 & Power Core E90 Lightshow — Part #W13112130003

The Razor Power Core range was built around a single engineering principle: a high-torque, maintenance-free hub motor powered by a rechargeable battery that delivers consistent, reliable performance from the first ride to the last. When that battery reaches the end of its service life — losing capacity, failing to hold a charge, or refusing to charge at all — the entire Power Core experience is compromised.

This is the genuine factory replacement battery for the Power Core S80, Power Core S85, and Power Core E90 Lightshow, built to the exact 12V / 7Ah Sealed Lead Acid (SLA) specification of the original unit. The battery is supplied with the pre-installed wiring harness and connector, making it a direct plug-and-play replacement — no soldering, no adapters, and no wiring knowledge required.

The 12V / 7Ah SLA specification is the correct chemistry and capacity for the Power Core hub motor system. The sealed construction means the battery is completely maintenance-free and non-spillable, making it safe for use in the enclosed battery housing of the scooter deck. On a full charge, this battery provides up to 40 minutes of continuous ride time — the same performance the scooter delivered when new

Restore Full Ride Time — A degraded battery is the most common reason a Power Core scooter loses range or stops performing. Replacing it with the correct genuine battery restores the full 40-minute continuous ride time the scooter was designed to deliver.

Exact 12V / 7Ah Specification — The Power Core hub motor system is calibrated to operate from a 12V / 7Ah SLA battery. A battery with lower capacity will reduce ride time and may not provide sufficient current for the hub motor under load. A battery with incorrect voltage risks damaging the motor controller. This genuine battery is the correct specification in every dimension.

Plug-and-Play Installation — The pre-installed wiring harness and connector match the factory socket in the scooter deck exactly. The battery slides into the existing housing and connects in seconds — no tools, soldering, or electrical knowledge required.

Sealed, Maintenance-Free Construction — The sealed SLA construction means the battery requires no electrolyte top-ups, produces no gas during normal operation, and cannot spill — essential properties for a battery housed within the enclosed deck of a children's scooter.

Genuine Factory Fit — As a genuine manufacturer part, the battery dimensions, connector type, and wiring harness specification align exactly with the Power Core S80, S85, and E90 Lightshow battery housing. No modification or adaptation is required

Razor Power Core S80
All versions (also sold as Black Label E90 in some markets)
Razor Power Core S85
All versions (also sold as Black Label E100 in some markets)
Razor Power Core E90 Lightshow
All versions

Important — Power Core models only: This battery is designed for the Power Core range, which uses a hub motor in the rear wheel. It is not compatible with the standard Razor E90 or E100 (non-Power Core versions), which use a different battery specification and connector. Always confirm your model name includes ""Power Core"" before ordering.How to identify your model: The model name is printed on the deck of the scooter. Power Core models feature a hub motor integrated into the rear wheel hub — there is no visible chain or belt drive.