Genuine 12V / 1.0A (1000mA) Single Pin Charger with EU Plug for Razor Electric Scooters & Ride-Ons — Part #W13173802414

A lost, damaged, or failed charger is one of the most common reasons a Razor ride-on sits unused — and it is also one of the easiest problems to solve incorrectly. The temptation to reach for a cheap generic charger is understandable, but the consequences of using the wrong output voltage or amperage are serious: overcharging degrades the battery's capacity permanently, undercharging leaves it in a partial state of discharge that shortens its working life, and an incorrect connector can damage the charging port on the ride-on itself.

This is the genuine Razor 12V / 1.0A (1000mA) single pin charger with a European two-pin plug, the factory-specification charger supplied with a wide range of Razor electric scooters and ride-ons in the European market. It delivers a precisely regulated 12 volts at 1,000 milliamps (1.0A) — the exact output required to charge the 12V battery systems fitted to all compatible models safely and efficiently, without the risk of over-voltage or excessive current that can permanently damage a sealed lead acid battery.

The single pin connector is the key fitment detail for this charger. It is designed specifically for models that use a single-pin charging port, and it is not interchangeable with the three-pin or two-pin connectors used on other Razor products. Always confirm your model's charging port type before ordering.

Razor Power Core E90
All versions
Razor Power Core E90 Glow
All versions
Razor E90
Version 7 and above
Razor Power Core S80
All versions
Razor Power Core S85
All versions
Razor PowerRider 360
Version 4 and above
Razor Crazy Cart Shift 2.0
Blue edition
Razor Crazy Cart Shift Lightshow
All versions
Razor E Punk
All versions
Razor MX125 Dirt Rocket
All versions
Razor Pocket Mod Petite
All versions

E90 owners — version check required: This charger is compatible with the E90 from Version 7 onwards only. E90 versions 1–6 use a different charger specification. Locate the barcode sticker on your battery cover or the bottom of the frame — the 7th and 8th digits indicate your version number.PowerRider 360 owners: Compatible with Version 4 and above only. Earlier versions use a different charging connector.Single Pin Connector: This charger uses a single pin connector. It is not compatible with Razor models that use a two-pin or three-pin charging port. If you are unsure of your model's connector type, check the charging port on your ride-on before ordering.